Last updated September 15th, 2013 at 08:46 pm
Sometimes you feel disturbance with your internet connection, it starts showing more 404 and “server time out errors” with going to some addresses in the browser. This problem seems with internet connection but some times the problem is not there, because that time your Internet protocol settings may have some disturbance with them. You can overcome with this problem my changing your internet protocol settings, if you do not know how to do this then here is a complete tutorial about internet protocol settings. If you have some other issues with your internet protocol settings then you must have some knowledge about internet protocol settings and in this article you can know the basics. Below is the complete guide on how to change internet protocol settings in Windows.
1: Go In the Control Panel
If you want to see the settings of anything in your windows system then there is control room where you can get the all. For changing internet protocol settings you have to go in the control panel. For this, move the mouse cursor to the left lower corner of the window and click on “Start“, then on the right side of this start window click on the “Control panel” as shown in the picture below.
2: Go in the Network Connections
After completing the task described in the first point, mouse the mouse cursor on the right side and click on “Network and Internet Connections” as shown in the picture below. This will open the network settings for your windows system. Now move onto the next point.
3: Go In the Networks
Now you have to in the network connections in the network and internet connections window, this will be on the lower side of the window click on it as shown in the picture to see all the network connections in your system.
Now right click on the active network which you are currently using, and then click on the properties of it, which will open the properties of your active network. Now in the general tab of the properties, click on “internet protocol TCP/IP” in the area “This network use the following items “, then click on the properties of this item as shown in the picture below.
In the properties you will see some useful features as shown in the picture below. In the General tab you will see two options which are “obtain IP address automatically and just below it there will be Obtain DNS server address automatically”.
You can add your desired IP address and DNS server address by clicking on “use the following IP address and use the following DNS server address separately”. By clicking on these put the details which you want to enter, that all important with the Internet Protocol settings.
So, this is the complete step by step tutorial on how to change internet protocol settings, this method will help you a lot if you are getting a lot of “server not found” errors in your web browser. We hope you will like the stuff but stay in touch with us because there is coming more.